Home ProductsPaver Chemco Epoxy Grout

Grout

Paver Chemco Epoxy Grout

Q: What is epoxy grout and why is it better than cement grout?

Epoxy grout is a two or three-component system that cures to form an impervious, chemically resistant, colour-fast joint. Unlike cement grout, it does not absorb water or stains, does not require sealing, and maintains its colour permanently. It is the preferred choice for swimming pools, commercial kitchens, hospitals, and any area with chemical exposure.

Q: Is epoxy grout difficult to apply?

Epoxy grout is more demanding to apply than cement grout due to its limited pot life and the need to clean excess material promptly. However, with the right technique — working in small sections, cleaning within 20–30 minutes — it is very manageable. We recommend a trial area for first-time users.

Q: Can I use epoxy grout in a swimming pool in high-humidity monsoon climates?

Yes, Paver Chemco Epoxy Grout is ideal for swimming pools. It provides complete water impermeability and resistance to pool chemicals including chlorine. Pools should not be filled for at least 21 days after grouting to allow full cure.

Three-Component Epoxy Resin Tile Joint Grout

Paver Chemco Epoxy Grout is a high-performance three-component system comprising Part A (Epoxy Resin), Part B (Hardener), and Part C (Filler Powder). Once combined, it forms an impervious, chemically resistant, permanently colour-fast tile joint that far surpasses conventional cement grouts. No sealing required. Ideal for commercial kitchens, swimming pools, hospitals, laboratories, and anywhere hygiene and chemical resistance are paramount.

Get a Quote Download TDS

Key Features

Why Choose EG-01?

Outstanding chemical resistance to acids, alkalis, oils

Zero water absorption — fully impervious joints

Permanent colour fastness — no sealing required

Non-shrink formulation for void-free joints

High compressive strength >45 N/mm²

Suitable for joint widths 2–12 mm

Easy cleaning with water and detergent

Applications

Where to Use

Commercial kitchens and food processing areas

Swimming pools and water features

Hospital floors and walls

Laboratories and pharmaceutical areas

Industrial floors with chemical exposure

Wet rooms and bathroom floors

Technical Specifications

Product Data

Property	Value
Chemical Base	Three-component epoxy resin system
Pack Size	1 kg, 3 kg, 5 kg pre-batched kits
Joint Width	2–12 mm
Pot Life (27°C)	45–60 minutes
Light Foot Traffic	12 hours
Full Traffic	24 hours
Full Chemical Resistance	7 days
Compressive Strength (7d)	>45 N/mm²
Flexural Strength (7d)	>30 N/mm²
Water Absorption (240 min)	<0.1 g
Shrinkage	<1.5 mm/m
Shelf Life	24 months sealed

Coverage & Pack Size

Depends on tile size and joint width. For 600×600 mm with 3 mm joint: approx. 0.18 kg/m².

1 kg, 3 kg, 5 kg kits

Available Colours

WhiteGreyBeigeIvoryCharcoalBlackBrown

Application Guide

Step-by-Step Instructions

Prepare Joints

Ensure tile adhesive is fully cured (min. 24 hours). Clean joints thoroughly — must be dry and free from dust, grease, and moisture. Do not apply over wet or damp joints.

Mix Components

Empty entire Part A (Resin) and Part B (Hardener) into a clean pail. Mix at max. 100 rpm for 2 minutes. Add Part C (Filler) gradually while mixing for 3–4 minutes until uniform and homogeneous. Do not add water.

Apply Grout

Pour mixed grout onto tile surface immediately. Use a hard rubber squeegee diagonally across joints, pressing firmly to ensure full, void-free filling.

Initial Clean

After 20–30 minutes, scrub tile surface with clean water and non-abrasive sponge. Wipe with a clean thick cloth. Do not flood joints with water.

Final Clean

Perform final clean within 24 hours using neutral pH detergent and warm water. Protect area from chemical contact for 7 days for full cure.

FAQs

Frequently Asked Questions

What is epoxy grout and why is it better than cement grout?

Epoxy grout is a two or three-component system that cures to form an impervious, chemically resistant, colour-fast joint. Unlike cement grout, it does not absorb water or stains, does not require sealing, and maintains its colour permanently. It is the preferred choice for swimming pools, commercial kitchens, hospitals, and any area with chemical exposure.

Is epoxy grout difficult to apply?

Epoxy grout is more demanding to apply than cement grout due to its limited pot life and the need to clean excess material promptly. However, with the right technique — working in small sections, cleaning within 20–30 minutes — it is very manageable. We recommend a trial area for first-time users.

Can I use epoxy grout in a swimming pool in high-humidity monsoon climates?

Yes, Paver Chemco Epoxy Grout is ideal for swimming pools. It provides complete water impermeability and resistance to pool chemicals including chlorine. Pools should not be filled for at least 21 days after grouting to allow full cure.

Need Paver Chemco Epoxy Grout?

Find a dealer near you in your region.

Find Dealer Call Us