Home ProductsPaver Chemco Tile Grout

Grout

Paver Chemco Tile Grout

Q: How do I choose the right grout colour?

For a seamless, contemporary look, choose a grout colour close to the tile colour. For a contrasting look, choose a complementary colour. White and grey are the most popular choices for tropical monsoon regions homes. Request a grout colour chart from your Paver Chemco dealer.

Q: Can Paver Chemco Tile Grout be used outdoors?

Yes. Paver Chemco Tile Grout is suitable for both interior and exterior applications. For areas with higher chemical or water exposure such as swimming pools or commercial kitchens, we recommend Paver Chemco Epoxy Grout instead.

Q: How long after tiling can I apply grout?

Wait a minimum of 24 hours after tiling before applying grout to allow the tile adhesive to set fully. In humid conditions (such as during monsoon season), allow 48 hours.

Polymer-Modified Cementitious Tile Joint Filler

Paver Chemco Tile Grout is a premium ready-to-mix, polymer-modified cementitious joint filler for ceramic, vitrified, natural stone, and mosaic tiles. It delivers smooth consistency, excellent colour fastness, and high resistance to water, staining, and efflorescence. Available in 8 standard colours to match any interior or exterior design scheme.

Get a Quote Download TDS

Key Features

Why Choose TG-01?

Single-component — only water required

Smooth paste consistency for effortless application

Excellent colour fastness — resists fading

High resistance to water and staining

Suitable for joints from 1 to 6 mm

Available in 8 standard colours

Interior and exterior use

Applications

Where to Use

Ceramic and porcelain tile joints

Vitrified tile joints

Natural stone tile joints

Mosaic tile joints

Interior and exterior walls and floors

Technical Specifications

Product Data

Property	Value
Chemical Base	Polymer-modified Portland cement
Pack Size	5 kg and 10 kg bags
Coverage	Refer coverage table (tile size dependent)
Joint Width	1–6 mm
Pot Life	60 minutes at 27°C
Foot Traffic	24 hours
Full Cure	72 hours
Compressive Strength (28d)	>20 N/mm²
Flexural Strength (28d)	>7 N/mm²
Water Absorption	<5% after 240 min
Shelf Life	12 months

Coverage & Pack Size

Depends on tile size and joint width. For 300×300 mm tiles with 3 mm joint: approx. 0.32 kg/m².

5 kg and 10 kg bags

Available Colours

WhiteIvoryGreyBeigeCharcoalBrownBlackRed Oxide

Application Guide

Step-by-Step Instructions

Prepare Joints

Ensure tile adhesive is fully cured (min. 24 hours). Remove all spacers, debris, and dust from joints. Joints must be clean and dry.

Mix Grout

Add 200–220 ml water per 1 kg of grout powder. Mix with drill or by hand for 3–5 minutes to smooth lump-free paste. Rest 5 minutes, remix.

Apply

Spread diagonally across tile surface with a rubber grout float, pressing firmly into joints. Work in 2–3 sqm sections.

Clean

After 20–30 minutes, clean tile surface with a damp sponge using circular motion. Rinse sponge frequently. Avoid excess water on joints.

Final Polish

After 24 hours, polish tile surface with a dry cloth to remove any haze.

FAQs

Frequently Asked Questions

How do I choose the right grout colour?

For a seamless, contemporary look, choose a grout colour close to the tile colour. For a contrasting look, choose a complementary colour. White and grey are the most popular choices for tropical monsoon regions homes. Request a grout colour chart from your Paver Chemco dealer.

Can Paver Chemco Tile Grout be used outdoors?

Yes. Paver Chemco Tile Grout is suitable for both interior and exterior applications. For areas with higher chemical or water exposure such as swimming pools or commercial kitchens, we recommend Paver Chemco Epoxy Grout instead.

How long after tiling can I apply grout?

Wait a minimum of 24 hours after tiling before applying grout to allow the tile adhesive to set fully. In humid conditions (such as during monsoon season), allow 48 hours.

Need Paver Chemco Tile Grout?

Find a dealer near you in your region.

Find Dealer Call Us